|
4411
FINEST INTERIOR PLASTER
Formerly 033j
Super smooth
Lime hydrate finishing plaster
- Ultra-fine texture (0.31 mm): Ensures smooth application and a high-quality finish.
- Natural lime-based formulation: Provides an environmentally friendly and natural finishing solution.
- Natural mold resistance: The alkaline properties of lime help prevent the growth of mold and fungi.
- High vapor permeability: Allows walls to breathe and reduces moisture accumulation.
- Excellent adhesion to mineral substrates: Ideal for cement and cement-lime plasters.
- High workability: Spreads easily without dragging or sticking to tools.
- Low shrinkage: Minimizes the risk of microcracks after drying.
- Compatible with decorative finishes: Suitable as a base for paints, decorative plasters, and other finishing coatings.
- Ideal for restoration projects: Especially suitable for historic buildings where breathable, natural materials are required.
- Improves adhesion of finishing materials: Mineral composition provides excellent bonding.
- Eco-friendly and safe: Recommended for residential buildings, schools, healthcare facilities, and other public spaces.
Area of application
- Indoor: wall + ceiling
Heating and cooling area
- Wall
Processing method
- For hand and machine processing
- For surface finishing on base plasters.
- Can we use it on concrete walls & ceilings?
- What about rooms with high humidity (bathrooms)?
- what about basements?
- What are the differences to gypsium plaster?
- Is the primer needed?
- can you put it on a clay plaster?
Contact
Loading...
Processing details
Learn more about technical details for processing this product.
Substrate requirement
The substrate must comply with the applicable standards, must be solid, free of loose particles, free of dust, paint, residues of demoulding agents and efflorescence. It must be sufficiently rough, dry and evenly absorbent. The surface shall not be frozen or water-repellent. The substrate shall be stable in volume.
Substrate preparation
Depending on substrate absorption and climatic conditions: penetrate absorbent substrates with Cemix 2613 primer. For concrete substrates, apply a [Cemix 4020 contact bridge]. If necessary, treat non-standard substrates with a suitable method to achieve the desired properties. Smooth unevenness of the substrate with suitable Cemix materials and allow to dry and cure. The substrate must comply with the applicable regulations, standards or recommendations of the material manufacturer.
Preparation of the mixture
Pour 25kg of CEMIX 4411 FINEST INTERIOR PLASTER into 8.75-9,25 L of clean water. Mix for 5 minutes with a slow-speed paddle mixer to a homogeneous mixture without lumps. Leave to rest for 3 minutes. Then mix again briefly. Use suitable machinery when processing by machine.
Water demand
| Quantity | Liters (Min) | Liters (Max) |
|---|---|---|
| 1 kg | 0,36 l | 0,37 l |
| 25 kg | 9 L | 9,25 l |
Mixing
Mixing time
5 min
Mixing speed in Rpm
800x/min
Ripe time
3 min
Processing instructions
The finishing plaster should be applied in a very thin layer of 2 to 5 mm. Apply in two thin coats to achieve a perfectly levelled straight surface, using a stainless steel trowel or other suitable tool. After the material has tightened and is pressure-resistant, smooth the surface with a felt and then with a foam trowel while sprinkling with water to unify the surface appearance. Finish the plaster with an interior paint.
Application thickness
| Minimum layer thickness | 2 mm |
|---|---|
| Recommended layer thickness | 3 mm |
| Maximum layer thickness | 5 mm |
Consumption
Material consumption min.
1.7
Material consumption max.
-
Material consumption in measuring unit
Kg/m²/mm
Consumption renders
| Activity | Min/Recommend/Max layer thickness | Applied thickness | Min./Max. consumption in kg/m²/mm | Packaging size | Yield |
|---|---|---|---|---|---|
| Apply the putty in an even layer | 2mm-5mm | 3 mm | 1.7 kg/m²/mm | 1 kg | 0.196 m² |
| Apply the putty in an even layer | 2mm-5mm | 3 mm | 1.7 kg/m²/mm | 20 kg | 3.922 m² |
| Apply the putty in an even layer | 2mm-5mm | 3 mm | 1.7 kg/m²/mm | 25 kg | 4.902 m² |
Working time (potlife)
150 min
Treatment after application
After application, avoid direct sunshine, heat, humidity and draughts. Protect from frost and rain. Direct heating of the surface is prohibited.
Tool and cleaning instructions
Wash off tools with water immediately after finishing work. Clean dried residues mechanically.
Technical parameters
| Main binder | Lime hydrate |
| Made of material | Lime hydrate, mineral filler and improving additives. |
| Max. grain size | 0,4mm |
| Dry bulk density in Kg/m³ to | 816.2 |
Files
|
|