|
4824
INTERIOR PAINT
High-quality interior paint for perfect, durable surfaces
Matt finishing dispersion with excellent opacity
- Unique formula: Creates a durable, resistant surface with excellent coverage in fewer coats.
- High dispersion content: for bright and longlasting colours. Tintable on demand.
- Water-based: Low-odour and safe.
- Good vapour permeability: Contributes to maintaining a healthy indoor climate.
- High-quality: Ideal for new and renovated spaces in residential commercial interiors.
- High yield: 15 liters cover 75–105 m² with two coats.
- Easy application & cleanup: Apply with brush, roller, or spray-tools. Сlean easily with water, no thinner needed.
Area of application
- Indoor: wall + ceiling
Processing method
- For hand and machine processing
- For interior wall and ceiling. For use on old and new plastered, smoothened and water-based dispersion painted masonry (except lime paint) and ceilings. Not resistant to wet rubbing.
Processing details
Learn more about technical details for processing this product.
Substrate requirement
The substrate must comply with the relevant standards, be sound, stable, free from loose particles, dust, dirt, oil, mould release agent residues and efflorescence.
Substrate preparation
Before starting work, cover the surfaces to be protected.
Prior to application, depending on the absorbency of the substrate, use Cemix deep primer, Cemix bonding primer diluted 1:3-1:4 or CEMIX 4824 INTERIOR PAINT diluted 20-30% with water.
Preparation of the mixture
Before application, stir the paint carefully.
Yield: 0,14-0,20 L per square metre for two layers. One bucket (15 L) is sufficient for two layers of 75-105 m². The texture and absorbency of the substrate will affect the amount of material required.
Dilution: No need to dilute the paint. If dilution is necessary due to the method of application, it may be diluted with a maximum of 5% clean water.
Dillute only ...........
Mixing
Mixing time
5 min
Processing instructions
A minimum of two layers of paint should be applied to a properly prepared wall surface. Brushable, rollable, sprayable. Depending on the temperature and humidity of the room and the wall surface, a drying time of at least 2 hours is required before applying the second or further layers.
Order material completely and in the same batch.
Minor batch-to-batch deviations are production-related and do not constitute grounds for complaint.
In the case of subsequent deliveries or adjacent surfaces with different batches or product bases, color differences may occur. Alternatively, mix batches.
Check color shade before application - complaints after application are excluded.
Color impression may vary due to grain size, structure, substrate, processing, drying and light conditions.
Priming in the same color shade prevents the substrate from showing through.
When reworking old coatings, the binder base must be retained to ensure material compatibility and diffusion.
Consumption
Material consumption min.
0.14
Material consumption max.
0.2
Material consumption in measuring unit
Tool and cleaning instructions
Wash off tools with water immediately after finishing work. Clean dried residues mechanically.
Technical parameters
| Made of material | Plastic dispersion, titanium dioxide, calcium carbonate, paint additive, water. |
Files
|
|